Vuldb Updates

A vulnerability was found in Linux Kernel up to 6.4.11. It has been classified as problematic. This affects the function v4l2_m2m_num_src_bufs_ready/v4l2_m2m_num_dst_bufs_ready of the component media. Performing a manipulation results in improper locking. This vulnerability is known as CVE-2023-53519. Access to the local network is required for this attack. No exploit is available. Upgrading the affected component is recommended.

A vulnerability was found in Linux Kernel up to 5.10.180/5.15.112/6.1.29/6.3.3. It has been rated as critical. Affected by this vulnerability is the function ext4_get_group_info. This manipulation causes denial of service. This vulnerability is tracked as CVE-2023-53503. The attack is only possible within the local network. No exploit exists. Upgrading the affected component is advised.

A vulnerability labeled as critical has been found in Linux Kernel up to 6.1.15/6.2.2. This vulnerability affects the function mnt_get_count of the file /dev/vdc of the component io_uring. Executing a manipulation can lead to buffer overflow. This vulnerability is registered as CVE-2023-53511. The attack requires access to the local network. No exploit is available. The affected component should be upgraded.

A vulnerability was found in Linux Kernel up to 6.4.7. It has been classified as problematic. This vulnerability affects the function nla_policy of the file drivers/net/macvlan.c. This manipulation causes out-of-bounds write. This vulnerability is tracked as CVE-2023-53516. The attack is only possible within the local network. No exploit exists. Upgrading the affected component is recommended.

A vulnerability marked as critical has been reported in Linux Kernel up to 5.15.112/6.1.29/6.3.3. This issue affects the function __block_write_full_page of the file fs/buffer.c. The manipulation leads to integer overflow. This vulnerability is documented as CVE-2023-53513. The attack requires being on the local network. There is not any exploit available. It is suggested to upgrade the affected component.

A vulnerability was found in Linux Kernel up to 6.4.11 and classified as critical. Affected by this issue is the function vm_dev. Such manipulation leads to use after free. This vulnerability is traded as CVE-2023-53515. Access to the local network is required for this attack to succeed. There is no exploit available. It is suggested to upgrade the affected component.

A vulnerability categorized as problematic has been discovered in Juniper Security Director 24.4.1. This affects an unknown function. The manipulation results in missing authorization. This vulnerability is known as CVE-2025-52950. It is possible to launch the attack remotely. No exploit is available.

A vulnerability was found in Juniper Junos OS up to 22.2R3-S0/22.4R1 on MX. It has been classified as critical. This affects an unknown part of the component Connectivity Fault Management. This manipulation causes out-of-bounds write. This vulnerability appears as CVE-2025-52952. The attacker needs to be present on the local network. There is no available exploit. Upgrading the affected component is recommended.

A vulnerability was found in parcel up to 2.0.0-alpha. It has been classified as problematic. The impacted element is an unknown function of the component XMLHttpRequest Handler. The manipulation leads to origin validation error. This vulnerability is traded as CVE-2025-56648. It is possible to initiate the attack remotely. There is no exploit available.

A vulnerability was found in Linux Kernel up to 6.1.146/6.6.99/6.12.39/6.15.7. It has been declared as critical. This issue affects the function hid_hw_raw_request of the component Low Level Transport Driver. The manipulation results in buffer overflow. This vulnerability is cataloged as CVE-2025-38494. The attack must originate from the local network. There is no exploit available. It is recommended to upgrade the affected component.

A vulnerability was found in Hitachi Energy MicroSCADA X SYS600 up to 10.6. It has been classified as critical. This vulnerability affects unknown code of the component Monitor Pro Interface. The manipulation leads to improper privilege management. This vulnerability is referenced as CVE-2025-39202. The attack can only be performed from a local environment. No exploit is available.

A vulnerability identified as critical has been detected in Hitachi Energy MicroSCADA X SYS600 up to 10.6. The impacted element is an unknown function of the component Notify Service. Performing a manipulation results in incorrect default permissions. This vulnerability is cataloged as CVE-2025-39201. The attack must be initiated from a local position. There is no exploit available.

A vulnerability labeled as critical has been found in Juniper Junos OS up to 24.4R1-S3. The impacted element is an unknown function of the component Line Card Script Processing. The manipulation results in incorrect permission assignment. This vulnerability was named CVE-2025-30661. The attack needs to be approached locally. There is no available exploit. The affected component should be upgraded.

A vulnerability has been found in Linux Kernel up to 6.12.33/6.15.2 and classified as problematic. This issue affects the function smp_processor_id of the component scsi. This manipulation causes privilege escalation. This vulnerability appears as CVE-2025-38288. The attacker needs to be present on the local network. There is no available exploit. The affected component should be upgraded.

A vulnerability categorized as critical has been discovered in Linux Kernel up to 6.6.93/6.12.33/6.15.2. This impacts the function smp_processor_id of the component Amlogic DDR PMU Driver. The manipulation results in stack-based buffer overflow. This vulnerability was named CVE-2025-38295. The attack needs to be approached within the local network. There is no available exploit. It is advisable to upgrade the affected component.

A vulnerability marked as problematic has been reported in Linux Kernel up to 6.15.2/fc2778c42f99c7de52fc004157b3c3ee4dcc208a. This impacts an unknown function of the file kernel/bpf/verifier.c of the component bpf. This manipulation causes privilege escalation. This vulnerability is tracked as CVE-2025-38279. The attack is only possible within the local network. No exploit exists. It is suggested to upgrade the affected component.

A vulnerability marked as problematic has been reported in Alinto SOPE SOGo up to 5.12.2. This impacts an unknown function of the file sope-core/NGExtensions/NGHashMap.m of the component Query String Handler. This manipulation causes null pointer dereference. This vulnerability appears as CVE-2025-53603. The attack may be initiated remotely. There is no available exploit. It is recommended to apply a patch to fix this issue.

A vulnerability labeled as problematic has been found in Hitachi Energy MicroSCADA X SYS600 up to 10.6. This affects an unknown function of the component Web Interface. Executing a manipulation can lead to information disclosure. This vulnerability is registered as CVE-2025-39204. It is possible to launch the attack remotely. No exploit is available.

A vulnerability was found in Astun Technology iShare Maps 5.4.0. It has been classified as problematic. Affected by this issue is some unknown functionality of the file atCheckJS.aspx. Performing a manipulation of the argument ref results in open redirect. This vulnerability is known as CVE-2025-6089. Remote exploitation of the attack is possible. Furthermore, an exploit is available. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was found in SICK Field Analytics and classified as problematic. Affected by this vulnerability is an unknown functionality of the component TLS Handler. Executing a manipulation can lead to risky cryptographic algorithm. This vulnerability is registered as CVE-2025-49196. It is possible to launch the attack remotely. No exploit is available.